联系人：苑先生
电话：15262418082
邮箱：18832644684@163.com
网址：www.nasdmach.com
地址：江苏苏州市吴中区上新东路15号
Technical parameter
Equipment type | NASD-SJJCSB01 |
Machine size | Principal part contract：L1250*W1000*H2000mm Vibrating disk part approx：L1200*W800*H1400mm |
Machine weight | About 500Kg |
Power supply | 220V 50Hz |
Equipment power | 1.5Kw |
Air supply | 0.4-0.8MPA |
Optional configuration | Up view + side view + Down view + top view (the detection camera station can be increased or decreased according to the detection item) |
Detection range | Full 360° inspection |
Test material | Fasteners such as screws and nuts, hardware, mobile phone parts, plastic and rubber products, electronic components, etc |
Test item | Size, inner hole blockage, aperture size, curvature, poor coating, crushing scratches, burrs, notches, edge breakage, scratches, burrs, crushing, mixing, paint off, height, dent, symmetry, profile, color, etc |
Applicable specification | Outer diameter φ1.0mm-φ20.0mm; Height 2.0mm-25.0mm |
Detection speed | Up to 1200pcs/min (depending on specific product and technical requirements) |
Detection accuracy | Up to ±0.001mm (according to specific product and technical requirements) |
Software system | Nastan Optical imaging System |
Operating ambient temperature | 0℃-45℃ |
Copper nut surface defect detection equipment is an instrument used to detect the surface quality of copper nuts. Copper nut is a threaded connector used to connect mechanical equipment, and its surface quality directly affects the overall use effect and performance. Therefore, timely detection of defects on the surface of copper nuts is very important.
Copper nut surface defect detection equipment usually adopts optical imaging technology, using high-definition cameras and image processing algorithms to fully scan and detect the nut surface. This device can quickly and accurately identify various defects on the surface of the nut, such as dents, bumps, scratches, bubbles, etc., and automatically classify and grade them according to set standards.
The working principle of the copper nut surface defect detection equipment is to collect the image of the nut surface through the optical sensor, and then transmit the image data to the image processing system for analysis and processing. In the process of processing, the system will compare and screen the image according to the set defect identification standard, and finally output the detection result and give an alarm.
Copper nut surface defect detection equipment has the following features:
1. High efficiency and fast: The equipment adopts automatic detection technology, which can complete the detection of a large number of copper nut surfaces in a short time, improving production efficiency and quality assurance level.
2. Accurate and reliable: The equipment adopts high-definition imaging technology, which can accurately identify and analyze small defects, improving the accuracy and reliability of detection.
3. Easy to operate: the equipment adopts human-computer interaction interface, easy to operate, no professional and technical personnel, you can quickly get started.
4. Safety and environmental protection: The equipment adopts non-destructive testing technology, no need to carry out destructive testing on the nut, safe and environmental protection.
5. Data management: The device supports data storage and management of test results, and can view historical records and generate test reports at any time to facilitate production management and quality traceability.
In general, the copper nut surface defect detection equipment is an advanced quality inspection equipment, which can effectively improve the production efficiency and product quality of enterprises, and provide strong support for the sustainable development of enterprises. In the future development, the equipment will continue to undergo technological upgrades and innovations to provide more comprehensive surface defect detection solutions for more industries.
