联系人：苑先生
电话：15262418082
邮箱：18832644684@163.com
网址：www.nasdmach.com
地址：江苏苏州市吴中区上新东路15号
Technical parameter
Equipment type | NASD-SJJCSB01 |
Machine size | Principal part contract：L1250*W1000*H2000mm Vibrating disk part approx：L1200*W800*H1400mm |
Machine weight | About 500Kg |
Power supply | 220V 50Hz |
Equipment power | 1.5Kw |
Air supply | 0.4-0.8MPA |
Optional configuration | Up view + side view + Down view + top view (the detection camera station can be increased or decreased according to the detection item) |
Detection range | Full 360° inspection |
Test material | Fasteners such as screws and nuts, hardware, mobile phone parts, plastic and rubber products, electronic components, etc |
Test item | Size, inner hole blockage, aperture size, curvature, poor coating, crushing scratches, burrs, notches, edge breakage, scratches, burrs, crushing, mixing, paint off, height, dent, symmetry, profile, color, etc |
Applicable specification | Outer diameter φ1.0mm-φ20.0mm; Height 2.0mm-25.0mm |
Detection speed | Up to 1200pcs/min (depending on specific product and technical requirements) |
Detection accuracy | Up to ±0.001mm (according to specific product and technical requirements) |
Software system | Nastan Optical imaging System |
Operating ambient temperature | 0℃-45℃ |
The screw appearance size testing device is used to check whether the screw appearance size meets the requirements. Screws are commonly used parts in mechanical connectors, and the accuracy of their appearance dimensions directly affects their quality and performance during use. Therefore, it is very important to accurately detect the appearance size of the screw.
The screw appearance measurement equipment is usually composed of optical sensor, measurement system, data processing system, etc. The appearance of the screw is scanned by the optical sensor, and the scanned data is transmitted to the measurement system for measurement. The measuring system will compare the screw appearance size according to the preset standard to determine whether the screw meets the requirements.
The screw appearance measurement equipment has the characteristics of fast, accurate and reliable. It can realize the high-speed detection of screw appearance size, which greatly improves the production efficiency; At the same time, due to the use of advanced measurement technology, the test results have a high degree of accuracy and reliability, so that customers can rest assured that the qualified products detected.
In the actual production, the screw appearance measurement equipment is widely used in various industries. Especially in the fields of automobile, aerospace, ship, etc., the requirements for the appearance size of screws are more stringent, so the appearance size detection of screws is particularly important. The screw appearance size testing equipment can effectively improve production efficiency and product quality through automatic and intelligent testing methods, and has been favored by the majority of manufacturers.
In the future, with the continuous development of the manufacturing industry and the progress of technology, the screw appearance size testing equipment will continue to improve and develop. We look forward to the introduction of more advanced and more efficient screw appearance size testing equipment, contributing to the development of manufacturing industry and the improvement of product quality. The continuous innovation and progress of screw appearance size testing equipment will bring more reliable and efficient production methods for manufacturers, thus promoting the entire manufacturing industry to a higher level.
